Slurry Valves GD Series

Tipologia Knife Gate Valves

Descrizione del prodotto

Slurry valves

Slurry knife gate valves for very loaded products with solids, used for suspended matter in mining. It does not present neither salient nor any split in the pipe. It is not needed any joint between the flanges as it is incorporated in the body.
Bidirectional wafer‐design knife gate valve.
Monoblock one‐piece cast iron body.
Stainless steel gate. Two rubber sleeves.
Provides high flow rates with low pressure drop.
Various seat materials available.

This valve main characteristic is that it provides a full continuous flow. 
The GD valve’s body is composed of one single “monoblock” piece. 


Slurry valve. If it is used for dry solids in gravity feed applications it should be installed with the arrow on the body pointing in the opposite direction to the flow.

Designed for applications such as:

Paper Industry, Mining, Silo emptying, Chemical plants, Bumping Food, Industry Sewage treatment.


Estándar desde DN 50 a DN 600.
In caso di diametri maggiori consultare.

Pressioni di lavoro

  • DN 50-250 = 10 bar
  • DN 300-400 = 6 bar
  • DN 450 = 5 bar
  • DN 500-600 = 4 bar
  • DN 700-1600 = 2 bar

Scarica la documentazione tecnica

> Catalogo > Scheda prodotto

Desideriamo contattare con te per rispondere a tutte le vostre domande

Costruzione de la valvola che tu ha bisogno